2000 Mitsubishi TOWN BOX WIDE

INCOMING FROM JAPAN!!!! Rare , because it is not a key mini van, it is full size serious van, legal to register in any USA state! ONE OWNER Mitsubishi Town Box Wide Year: 2000 Make: Mitsubishi Model: TOWN BOX WIDE Two Trim: 4WD VIN: U66W-0001354 Mileage: 45,687mi / 73,099 km original verified mileage Fuel type: Gasoline Engine: 1.1L 4cylinder EFI Driveline: 4WD PW AC SRS AIRBAG PS Town Box Wide (U65W/66W)[edit] This model was created on the basis of the single-volume Town Box. Launched in June 1999, the Town Box Wide featured large front and rear bumpers, bubble wheel arches and an aerodynamic body kit. The body is equipped as follows: two front doors + two sliding doors + rear "gates". The cabin is equipped with six seats located in three rows. Each seat is separated from the other. The glass on the passenger sliding door opens down ("hides" in the door). The Town Box Wide was equipped with a 1.1-liter inline 4-cylinder SOHC engine and only a 4-speed automatic transmission. Mitsubishi Town Box Wide has a box-like appearance, which is very practical to use. Low-lying sills are convenient when boarding and disembarking. The well-thought-out design of the seats in all rows makes the cabin comfortable. The front panel looks very functional, in its upper part there are trays for small things, spacious compartments are provided, the dashboard is quite informative. The Box Wide has one complete set. It is equipped with air conditioning, an electrical package (glass, mirrors, central locking), a rear wiper, and a cassette radio. Options included alloy wheels and front fog lights, wood panel trim. Town Box Wide model was equipped with a 4-cylinder 1.1-liter (1094 cc) SOHC16 power unit of the 4A31 brand. Compared to the 660 cc 3-cylinder engine, the standard Town Box with its 48 "forces" and 62 Nm of torque had a higher thrust of 100 Nm and a power of 75 "horses", and each of which "pulled" 13.2 kg of the total weight of the car (data for the rear-wheel drive model), while the Town Box had all 18.75 kg of horsepower. The Mitsubishi Town Box Wide had only one type of transmission - a 4-speed automatic transmission. The car was produced in a rear- or all-wheel drive (Easy Select 4WD) version. The 4WD Easy Select system, widely used in Mitsubishi cars, allows you to change the 2WD to 4WD mode and vice versa while the car is moving using a switch. The suspension of the Mitsubishi Town Box Wide is structurally very simple: independent at the front, dependent at the rear, both are spring, guaranteeing quite a comfortable ride. The brakes are disc at the front and drum at the rear. The steering is with a hydraulic booster. The body dimensions are 3605 x 1535 x 1810 mm (L x W x H). That is, 210 mm longer than the Town Box and 60 mm wider. The wheelbase of the Town Box Wide is the same size as that of the main Town Box model - 2390 mm, but due to larger dimensions and wheels (tire size 165/65R14), the turning radius is slightly increased - from 4.7 to 4.8 m. The length of the Town Box Wide stretches for 2490 mm (+ 650 mm, taking into account the presence of the third row), its width is 1260 mm (+40 mm), and the height is 1225 mm, which is 100 mm less - the high roof here is replaced by the standard one. A free passage between all rear seats allows you to transport long things without removing them. If necessary, the third row of seats folds to the walls, and if you fold the second row, the cabin is transformed into a huge luggage compartment. The Mitsubishi Town Box Wide model was equipped as standard with driver and passenger airbags, three-point belts, and side impact protection amplifiers in the doors. An anti-lock braking system was offered as an option. In the event of a collision, the front of the body has increased safety performance due to the fact that the car is a single-box car with a semi-hood layout. Developing the advantages of the Town Box model in urban operation, the Mitsubishi Town Box Wide ha